Diagnostic codes#

This page lists every diagnostic code rietx can raise, with its name and the page that explains it.

A Diagnostic carries a level of info, warning or error, a code, a message and a suggestion. The message says what one case found, with its numbers. The suggestion says what to do about it. The explanation is the same for every case, so the package looks it up by code: Diagnostic.explanation returns the text the linked page shows.

The codes are filed by the part of the package that raises them:

Refinement: the stages, the guards, the corrections and the report.
Series and joint fits: a chain of fits, or one fit over several patterns.
Peaks and indexing: peak picking, the indexing search and the extinction screen.
Reading files: patterns, instrument files and recipes.
Other programs’ projects: GSAS-II, GSAS, FullProf and TOPAS files.
Structures and magnetism: structures, symmetry and magnetic structures.

The package raises 257 codes.

Code	Name	Page
`ABSORPTION_ESTIMATE_UNAVAILABLE`	No absorption correction was applied	Refinement
`ABSORPTION_MU_R_OUT_OF_RANGE`	Capillary absorption is beyond the fitted range	Refinement
`ABSORPTION_PLATE_THICKNESS`	Transmission plate far from its best thickness	Refinement
`ABSORPTION_THICKNESS_MATTERS`	Specimen thickness shifts the displacement parameters	Refinement
`ADP_NOT_POSITIVE_DEFINITE`	An anisotropic displacement tensor is not an ellipsoid	Refinement
`AIR_SCATTER_UNDECLARED`	Background lacks an air-scatter term	Refinement
`BACKGROUND_ABSORPTION`	The background can imitate a refined parameter	Refinement
`BACKGROUND_ORDER_AT_CAP`	Background order stopped at its limit	Refinement
`BISO_NEGATIVE`	A displacement parameter is negative	Refinement
`BISO_UNUSUALLY_LARGE`	A displacement parameter is implausibly large	Refinement
`BOUND_HIT`	A parameter finished on a limit	Refinement
`BRINDLEY_OUTSIDE_REGIME`	Particle absorption correction out of range	Refinement
`BRML_ABSORBER_ENGAGED`	An automatic absorber was in the beam	Reading files
`CAPILLARY_OFFSET_UNAVAILABLE`	Capillary offset aberrations are held at zero	Refinement
`CELL_DEGENERATE_PROBE`	The search tried a cell with no volume	Refinement
`CELL_RUNAWAY`	A cell parameter ran away during the fit	Refinement
`CHILD_GROUP_UNNAMED`	Child cell group has no standard symbol	Structures and magnetism
`CIF_CELL_ANGLE_CORRECTED`	Lattice angle set to its symmetry value	Structures and magnetism
`CIF_MAGNETIC_CENTERING_ASSUMED`	Magnetic centring loop missing	Structures and magnetism
`CIF_MAGNETIC_ION_UNCHARGED`	Magnetic ion has no charge stated	Structures and magnetism
`CIF_MAGNETIC_MAGNITUDE_ESD_NOT_STORED`	Moment uncertainty not carried	Structures and magnetism
`CIF_MAGNETIC_MOMENT_ON_ALLOWED`	Moment moved onto its symmetry-allowed form	Structures and magnetism
`CIF_MAGNETIC_NUCLEAR_GROUP`	Positions refine under the parent group	Structures and magnetism
`CIF_MAGNETIC_NUCLEAR_SETTING`	Positions refine under the file’s own group	Structures and magnetism
`CIF_MAGNETIC_NUMBER_MISMATCH`	Magnetic group number contradicts the operators	Structures and magnetism
`CIF_MAGNETIC_SPHERICAL_ESD_NOT_STORED`	Spherical moment uncertainties dropped	Structures and magnetism
`CIF_MAGNETIC_SYMMFORM`	File records its own moment constraint	Structures and magnetism
`CIF_MAGNETIC_UNIDENTIFIED`	Magnetic group not found in the database	Structures and magnetism
`CIF_SITE_LISTED_TWICE`	One site listed twice, second dropped	Structures and magnetism
`CIF_SITE_MULTIPLICITY_DISAGREES`	Stated multiplicity contradicts the coordinates	Structures and magnetism
`CIF_SITE_TWINS_MERGED`	Near-duplicate atoms merged onto a special position	Structures and magnetism
`CIF_SPECIES_NORMALISED`	Atom type symbol rewritten	Structures and magnetism
`CONSTRAINT_ACTIVE`	A constraint held the optimum on its edge	Refinement
`COVARIANCE_DIRECTION_DISCARDED`	A combination of parameters is not measured	Refinement
`COVARIANCE_UNAVAILABLE`	The esd calculation failed	Refinement
`DATA_SUPPORT_LOW`	Too few observations for the parameters	Refinement
`DECLARED_RANGE_NOT_RESTORED`	Old parameter left without a range	Refinement
`DECLARED_RANGE_RESTORED`	Old parameter given its default range	Refinement
`DISPERSION_NEGLECTED`	Anomalous scattering is switched off	Refinement
`EXTINCTION_CONDITIONS_PARTIAL`	Reflection conditions list is incomplete	Peaks and indexing
`EXTINCTION_FORBIDDEN_INTENSITY`	Intensity found where the class forbids it	Peaks and indexing
`EXTINCTION_GROUPS_NOT_SEPARABLE`	Several space groups share one pattern	Peaks and indexing
`EXTINCTION_PRIOR_APPLIED`	Declared facts removed space groups from the extinction classes	Peaks and indexing
`EXTINCTION_SCREEN_FAILED`	The extinction screen could not run	Peaks and indexing
`EXTINCTION_SYMBOL_AMBIGUOUS`	The extinction symbol is not settled	Peaks and indexing
`EXTRA_PEAK_NO_INTENSITY`	A declared peak refined to zero intensity	Refinement
`EXTRA_PEAK_ON_REFLECTION`	A declared peak sits on a modelled reflection	Refinement
`FLAT_DIRECTION`	Two parameters the data cannot separate	Refinement
`FLAT_DIRECTION_OMITTED`	Further flat directions not listed	Refinement
`FLOOR_HIT`	A parameter finished at zero	Refinement
`FROZEN_COMPILE_STALE`	Reported fit statistics differ from the stage’s own	Refinement
`FULLPROF_MAGNETIC_PHASE_OMITTED`	A FullProf magnetic phase was left out	Other programs’ projects
`FULLPROF_MAGNETIC_PHASE_READ`	A FullProf magnetic phase was merged in	Other programs’ projects
`FULLPROF_OCCUPANCY_UNCHECKED`	The setting check had nothing to compare	Other programs’ projects
`FULLPROF_ORIGIN_CHOICE`	A FullProf space group setting was chosen	Other programs’ projects
`FULLPROF_RHOMBOHEDRAL_RESTATED`	A rhombohedral phase was restated for FullProf	Other programs’ projects
`FULLPROF_SPECIES_NORMALISED`	A FullProf scattering label was respelled	Other programs’ projects
`FULLPROF_SPECIES_WRITTEN_NEUTRAL`	A FullProf ion was written as neutral	Other programs’ projects
`FULLPROF_TIE_DROPPED`	A FullProf constraint was not carried over	Other programs’ projects
`GSAS2_CIF_DEUTERIUM_AS_D`	Deuterium was written as D for GSAS-II	Other programs’ projects
`GSAS2_CIF_FIELD_NOT_WRITTEN`	A phase CIF cannot state the whole model	Other programs’ projects
`GSAS2_CIF_RHOMBOHEDRAL_RESTATED`	A rhombohedral phase was restated for GSAS-II	Other programs’ projects
`GSAS2_CIF_SETTING_IN_OPERATORS`	The setting is stated in the operators	Other programs’ projects
`GSAS2_CIF_SPECIES_WRITTEN_NEUTRAL`	A GSAS-II ion was written as neutral	Other programs’ projects
`GSAS2_GPX_BACKGROUND_NOT_CARRIED`	A GSAS-II background was not converted	Other programs’ projects
`GSAS2_GPX_CONSTRAINT_NOT_CARRIED`	GSAS-II constraints were not applied	Other programs’ projects
`GSAS2_GPX_COORDINATES_SYMMETRY_FIXED`	A GSAS-II flag sits on a fixed site	Other programs’ projects
`GSAS2_GPX_ITEM_NOT_READ`	Part of the GSAS-II project was not read	Other programs’ projects
`GSAS2_GPX_PHASE_MAGNETIC`	A magnetic phase appears in the GSAS-II project	Other programs’ projects
`GSAS2_GPX_SCALE_NOT_COMPARABLE`	A GSAS-II scale was not converted	Other programs’ projects
`GSAS2_GPX_SETTING_FROM_OPERATORS`	The setting was read from the operators	Other programs’ projects
`GSAS2_GPX_SPECIES_NORMALISED`	A GSAS-II atom type was respelled	Other programs’ projects
`GSAS2_GPX_TEXTURE_CONVERTED`	A GSAS-II texture was converted	Other programs’ projects
`GSAS2_GPX_TEXTURE_NOT_CARRIED`	A GSAS-II texture was not carried over	Other programs’ projects
`GSAS2_INSTPRM_CONVENTION_ASSUMED`	Axial divergence was split evenly	Reading files
`GSAS2_INSTPRM_FIELD_DROPPED`	Some time-of-flight keys were read and not kept	Reading files
`GSAS2_INSTPRM_FIELD_NOT_READ`	The file states items the instrument cannot hold	Reading files
`GSAS2_INSTPRM_FIELD_NOT_WRITTEN`	The exported file omits part of the instrument	Reading files
`GSAS2_INSTPRM_GEOMETRY_ASSUMED`	The file states no diffractometer geometry	Reading files
`GSAS2_INSTPRM_VALUE_DEFAULTED`	Items missing from the file took default values	Reading files
`GSAS2_INSTPRM_VALUE_FLOORED`	GSAS-II will raise a small axial divergence	Reading files
`GSAS2_INSTPRM_VALUE_MERGED`	Two axial-divergence values became one	Reading files
`GSAS_BANK_COMMENTED`	A commented-out bank record was used	Reading files
`GSAS_EXP_BACKGROUND_NOT_CARRIED`	A GSAS background function was not converted	Other programs’ projects
`GSAS_EXP_COORDINATES_SYMMETRY_FIXED`	A GSAS flag sits on a fixed site	Other programs’ projects
`GSAS_EXP_HISTOGRAM_NOT_READ`	A GSAS histogram was only partly read	Other programs’ projects
`GSAS_EXP_PHASE_MAGNETIC`	A magnetic phase appears in the GSAS file	Other programs’ projects
`GSAS_EXP_REFINE_FLAG_MERGED`	A GSAS flag is wider than the structure	Other programs’ projects
`GSAS_EXP_SCALE_NOT_COMPARABLE`	A GSAS scale was not converted	Other programs’ projects
`GSAS_EXP_SPECIES_NORMALISED`	A GSAS atom type was respelled	Other programs’ projects
`GSAS_EXP_SPECIES_WRITTEN_NEUTRAL`	A GSAS ion was written as neutral	Other programs’ projects
`GSAS_EXP_VALUE_NARROWED`	Written values lost trailing digits	Other programs’ projects
`GSAS_FIELD_OVERFLOW`	A GSAS field holds only asterisks	Other programs’ projects
`GSAS_IPARM_FIELD_DROPPED`	Some instrument records were read and not kept	Reading files
`GSAS_IPARM_LEGACY_LAYOUT`	The file used a legacy LANSCE layout	Reading files
`GSAS_IPARM_PROFILE_DECLINED`	A peak-shape set was not read	Reading files
`GSAS_IPARM_PROFILE_READ`	Peak-shape coefficients were read in an assumed order	Reading files
`GSAS_PRM_FIELD_DROPPED`	Some parameter-file fields were read and not kept	Reading files
`GSAS_PRM_FIELD_NOT_WRITTEN`	The exported .prm omits part of the instrument	Reading files
`GSAS_PRM_GEOMETRY_ASSUMED`	The .prm file states no geometry	Reading files
`GSAS_PRM_PROFILE_SET_DEFAULTED`	The bank offered several profile sets	Reading files
`GSAS_PRM_VALUE_NARROWED`	Values were shortened to fit the file	Reading files
`HARMONIC_ABSENT`	A declared harmonic refined to nothing	Refinement
`HARMONIC_FRACTION`	Fraction of a wavelength harmonic in the beam	Refinement
`HARMONIC_HELD`	A harmonic weight was declared but not refined	Refinement
`HIGH_CORRELATION`	Two parameters are strongly correlated	Refinement
`HIGH_CORRELATION_OMITTED`	Further correlated pairs not listed	Refinement
`HOLD_BLOCKED_PLAN`	A hold overrode part of the plan	Refinement
`HUMP_TOO_NARROW`	A background peak has become narrow	Refinement
`INDEX_ABSTAINED`	No cell reached the confidence gate	Peaks and indexing
`INDEX_BRAVAIS_AMBIGUOUS`	Lattice symmetry is not settled	Peaks and indexing
`INDEX_BUDGET_EXHAUSTED`	The time limit cut the search short	Peaks and indexing
`INDEX_CANDIDATES_TRUNCATED`	The candidate list was cut to a maximum	Peaks and indexing
`INDEX_CELL_SYSTEMATIC_UNQUANTIFIED`	Cell accuracy is worse than its esd	Peaks and indexing
`INDEX_DATA_INSUFFICIENT`	Data cannot support an indexing search	Peaks and indexing
`INDEX_DOMINANT_ZONE`	Lowest lines carry large indices on one axis	Peaks and indexing
`INDEX_GEOMETRIC_AMBIGUITY`	Different lattices give the same line positions	Peaks and indexing
`INDEX_IMPURITY_LINES`	Observed peaks have no matching reflection	Peaks and indexing
`INDEX_INLIER_RETRY`	The search was run again, accepting a cell that leaves lines unindexed	Peaks and indexing
`INDEX_MULTIPLE_SOLUTIONS`	More than one cell passes every check	Peaks and indexing
`INDEX_NOT_VALIDATED`	Candidates were not checked against the pattern	Peaks and indexing
`INDEX_PANEL_REDUCED`	Some figures of merit are undefined	Peaks and indexing
`INDEX_PREDICTED_BUT_ABSENT`	The cell predicts lines the pattern lacks	Peaks and indexing
`INDEX_PRIOR_USED`	A declared prior steered the search	Peaks and indexing
`INDEX_SEARCH_INCOMPLETE`	A search did not finish its domain	Peaks and indexing
`INDEX_SHIFT_ALLOWANCE`	Search tolerance widened for a 2θ shift	Peaks and indexing
`INDEX_SHIFT_DETECTED`	A systematic 2θ shift follows one cause	Peaks and indexing
`INDEX_SHIFT_FROM_PAIRS`	A 2θ shift was measured from line pairs	Peaks and indexing
`INDEX_SHIFT_MODEL_AMBIGUOUS`	A 2θ shift is present, cause unclear	Peaks and indexing
`INDEX_SINGLE_ENGINE`	Only one indexing engine ran	Peaks and indexing
`INDEX_SUPERCELL_REFUTED`	A smaller cell explains the same lines	Peaks and indexing
`INDEX_SYSTEMS_NOT_COVERED`	Some crystal systems were not searched	Peaks and indexing
`INDEX_VALIDATION_FAILED`	The Le Bail check of a candidate failed	Peaks and indexing
`INDEX_VOLUME_UNPHYSICAL`	Cell volume outside what the data support	Peaks and indexing
`INDEX_Z_NOT_INTEGER`	Cell holds a fractional number of formula units	Peaks and indexing
`K_VECTOR_UNSEPARATED`	Two propagation vectors fit equally well	Structures and magnetism
`LANDE_G_ASSUMED`	Landé g taken from the free ion	Structures and magnetism
`LAUE_CLASS_NOT_SEPARABLE`	The leading class spans more than one Laue class	Peaks and indexing
`LEBAIL_ALTERNATION_STOPPED`	The Le Bail passes stopped	Refinement
`LOW_ANGLE_UNMODELLED`	Unexplained signal below the first reflection	Refinement
`MAGNETIC_ION_ASSUMED`	Magnetic ion chosen by the package	Structures and magnetism
`MAGNETIC_SUBGROUP_PREFERRED`	A subgroup fits better than the winner	Structures and magnetism
`MAGNETIC_WIDTH_MOVED_MOMENT`	Magnetic broadening changed the refined moment	Refinement
`MAGNETIC_WIDTH_UNMEASURED`	Magnetic broadening not measured	Structures and magnetism
`MAGNETIC_WIDTH_UNMODELLED`	Magnetic peaks too narrow, moment lowered	Structures and magnetism
`MICROABSORPTION_SKIPPED`	Microabsorption correction not applied	Refinement
`MODEL_FAR_FROM_DATA`	The model does not describe the data	Refinement
`MOMENT_ANGLE_STATIONARY`	Moment direction sits on a symmetry direction	Structures and magnetism
`MOMENT_PAIR_DEGENERATE`	Two moments cannot be told apart	Structures and magnetism
`NEUTRON_RESONANT_ABSORBER`	A neutron resonant absorber is in the structure	Refinement
`OCCUPANCY_ABOVE_ONE`	Occupancy refined above a full site	Refinement
`ORIGIN_FIXED_ON_POLAR_AXIS`	A floating origin was fixed	Refinement
`ORIGIN_NOT_FIXED`	A floating origin could not be fixed	Refinement
`PARAMETRIC_FORM_REJECTED`	A parametric equation does not fit its target	Series and joint fits
`PARAMETRIC_OUT_OF_RANGE`	An equation put a parameter outside its bounds	Series and joint fits
`PARAMETRIC_TARGET_UNSEEN`	Equation sets a parameter in unseen patterns	Series and joint fits
`PATTERN_DEAD_CHANNELS`	A run of channels measured nothing	Reading files
`PATTERN_DUPLICATE_POINTS`	Repeated points were dropped	Reading files
`PATTERN_INTENSITY_SCALED`	The intensity scale could not be established	Reading files
`PATTERN_MULTISCAN_DEFAULTED`	Only the first of several scans was read	Reading files
`PATTERN_ROWS_DROPPED`	Some numeric rows were not read as data	Reading files
`PATTERN_SCAN_REVERSED`	The scan was stored in descending order	Reading files
`PATTERN_SIGMA_CONSTANT`	Every point has the same error estimate	Reading files
`PATTERN_UNDERSAMPLED`	Too few steps across each peak	Refinement
`PATTERN_X_AXIS_ASSUMED`	The scan axis was assumed to be 2θ	Reading files
`PATTERN_X_AXIS_IMPLAUSIBLE`	The axis reaches 0° or below	Reading files
`PAWLEY_OFF_DATA_RIDGED`	Pawley intensities taken from the restraint	Refinement
`PAWLEY_OVERLAP_UNRESOLVED`	Overlapping Pawley reflections cannot be split	Refinement
`PEAK_ASYMMETRY_UNMODELLED`	Asymmetry the peak shape does not carry	Peaks and indexing
`PEAK_AXIAL_TAIL`	Weak lines that may be axial tails	Peaks and indexing
`PEAK_CONTAMINATION_LINE`	Contamination lines excluded	Peaks and indexing
`PEAK_EXPECTED_FALSE_LINES`	How many kept lines are expected to be noise	Peaks and indexing
`PEAK_KALPHA2_ALIAS`	Kα2 candidates dropped before fitting	Peaks and indexing
`PEAK_KALPHA2_RESIDUAL`	Components on a modelled Kα2 maximum	Peaks and indexing
`PEAK_LIST_TOO_SHORT`	Too few usable lines to index	Peaks and indexing
`PEAK_NOT_SEPARABLE`	Components refuted as distinct lines	Peaks and indexing
`PEAK_POSITION_PRECISION`	Position precision relative to the line spacing	Peaks and indexing
`PEAK_SHOULDER_SEEDED`	Extra components seeded from the residual	Peaks and indexing
`PEAK_SIGMA_ASSUMED`	Position uncertainties were assumed	Peaks and indexing
`PEAK_UNRESOLVED_SHOULDER`	Components that never separated	Peaks and indexing
`PEAK_UNRESOLVED_SPLIT`	Splits reported as one line	Peaks and indexing
`PEAK_WIDTH_CAPPED`	Components broader than the width law allows	Peaks and indexing
`PEAK_WIDTH_LAW_MISMATCH`	Fitted widths disagree with the instrument	Peaks and indexing
`PHASE_UNCONSTRAINED`	The data cannot see this phase	Refinement
`QPA_ESD_UNAVAILABLE`	No weight fraction has an esd	Refinement
`QPA_FRACTION_RANGE`	Weight fractions a width profile admits	Refinement
`QPA_UNAVAILABLE`	Weight fractions cannot be formed	Refinement
`RAS_ATTENUATOR_PRESENT`	An attenuator factor was found and not applied	Reading files
`READER_OPTION_IGNORED`	A reader option does not apply here	Reading files
`RECIPE_BACKGROUND_PEAK_DEGENERATE`	A background peak spans the whole fit range	Reading files
`RECIPE_BACKGROUND_RESEEDED`	Background coefficients restart from zero	Reading files
`RECIPE_BOUND_HONOURED`	A recipe limit was applied	Reading files
`RECIPE_CONVENTION_ASSUMED`	A combined divergence value was halved	Reading files
`RECIPE_DISPERSION_DECLINED`	Anomalous scattering was switched off	Reading files
`RECIPE_ENGINE_DEFAULT_DECLINED`	A null broadening value was read as zero	Reading files
`RECIPE_FIELD_DROPPED`	A recipe field has no counterpart here	Reading files
`RECIPE_FIT_RANGE_CHANNELS`	The fit range became a channel set	Reading files
`RECIPE_FLAG_DROPPED`	A recipe refine flag was not honoured	Reading files
`RECIPE_FLAG_TRANSLATED`	A mixing parameter became two coefficients	Reading files
`RECIPE_NOTHING_REFINED`	The recipe flags no parameter for refinement	Reading files
`RECIPE_PLAN_STAGED`	Flagged parameters are freed in stages	Reading files
`RECIPE_SCALE_RESEEDED`	Phase scales were re-seeded from the data	Reading files
`RECIPE_SCHEMA_UNTESTED`	The recipe version has not been tested	Reading files
`RECIPE_ZERO_WEIGHT_EXCLUDED`	Zero-weight channels became excluded regions	Reading files
`RESOLUTION_NOT_POSITIVE`	The instrument width goes negative	Refinement
`RESOLUTION_UNCONSTRAINED`	Resolution refined on a Lorentzian pattern	Refinement
`RESTRAINT_TENSION`	The data disagree with a restraint	Refinement
`RIGID_BODY_MISFIT`	Data reject a rigid body’s shape	Refinement
`RIGID_BODY_UNSUPPORTED`	A rigid body motion is not measured	Refinement
`ROUGHNESS_ABSORPTION`	Roughness and displacement parameters are entangled	Refinement
`ROUGHNESS_OUTSIDE_REGIME`	Roughness model used outside its valid range	Refinement
`ROUGHNESS_UNCONSTRAINED`	Roughness has no visible effect	Refinement
`SCALE_B_INSEPARABLE`	Scale and displacement cannot be separated	Refinement
`SEQUENTIAL_CANCELLED`	The series stopped before the last pattern	Series and joint fits
`SEQUENTIAL_DISCONTINUITY`	A parameter jumps between two patterns	Series and joint fits
`SEQUENTIAL_MOMENT_HOLD`	A magnetic moment is indistinguishable from none	Series and joint fits
`SEQUENTIAL_MOMENT_ONSET`	The magnetic onset is only a bracket	Series and joint fits
`SEQUENTIAL_PATH_CHECK_INCOMPLETE`	The forward and backward comparison was partial	Series and joint fits
`SEQUENTIAL_PATH_DEPENDENT`	A trajectory depends on the refinement order	Series and joint fits
`SEQUENTIAL_PERSISTENT_FINDING`	A per-pattern finding recurs across the series	Series and joint fits
`SEQUENTIAL_RESEED`	A pattern was refitted from the initial model	Series and joint fits
`SEQUENTIAL_RWP_OUTLIER`	A pattern fits much worse than its neighbours	Series and joint fits
`SEQUENTIAL_UNRECOVERED`	A pattern failed every restart	Series and joint fits
`SEQUENTIAL_WIDTH_GROWTH`	A phase width grows as the fit worsens	Series and joint fits
`SERIES_PATTERN_FAILED`	A pattern could not be fitted	Series and joint fits
`SITE_SNAPPED_TO_SPECIAL_POSITION`	Site lies close to a special position	Structures and magnetism
`SIZE_NORMALISED_ACROSS_WAVELENGTHS`	Shared size term scaled across wavelengths	Series and joint fits
`SIZE_UNUSUALLY_SMALL`	Crystallite size is unusually small	Refinement
`SOLVE_B_TIED_PER_PARENT_SITE`	Supercell displacement parameters tied to the parent	Structures and magnetism
`SPACE_GROUP_SETTING_ASSUMED`	Space group setting chosen by default	Structures and magnetism
`SPECIES_FALLBACK_NEUTRAL`	An ion was scattered as a neutral atom	Refinement
`STAGE_FREED_NOTHING`	A stage freed nothing in one histogram	Series and joint fits
`STAGE_FREES_MAGNETIC_WIDTH_WITH_MOMENT`	Magnetic width and moment freed together	Refinement
`STAGE_MAX_ITER`	A stage stopped on its iteration limit	Refinement
`STAGE_PATH_NOT_FREE`	A stage named a fixed parameter	Refinement
`STAGE_PATH_UNKNOWN`	A stage named a parameter the model lacks	Refinement
`STEPHENS_STRAIN_NOT_POSITIVE`	Anisotropic strain coefficients are unphysical	Refinement
`STRAIN_UNUSUALLY_LARGE`	Strain broadening is unusually large	Refinement
`TEXTURE_NOT_POSITIVE`	Texture series gives a negative pole density	Refinement
`TOPAS_BLOCK_SKIPPED`	A TOPAS block is not a phase	Other programs’ projects
`TOPAS_CELL_COUPLING_DROPPED`	Tied TOPAS lattice parameters are independent here	Other programs’ projects
`TOPAS_FEATURES_NOT_IMPORTED`	The TOPAS import is partial	Other programs’ projects
`TOPAS_FEATURE_REFUSED`	A TOPAS construct blocks building the structure	Other programs’ projects
`TOPAS_FIELD_NOT_WRITTEN`	A phase term was left out of TOPAS	Other programs’ projects
`TOPAS_FIRST_RUN_READ`	Only the first TOPAS run was read	Other programs’ projects
`TOPAS_MAGNETIC_GROUP_READ`	A magnetic group was read from its number	Other programs’ projects
`TOPAS_MAGNETIC_PART_MERGED`	Two TOPAS phases were merged	Other programs’ projects
`TOPAS_MOMENT_CONVENTION`	TOPAS moment components were read as cell fractions	Other programs’ projects
`TOPAS_MOMENT_G_HELD`	A refined Landé factor is held fixed	Other programs’ projects
`TOPAS_MOMENT_ION_UNCHARGED`	A magnetic site has no oxidation state	Other programs’ projects
`TOPAS_ORIGIN_TRANSLATED`	A TOPAS origin suffix was translated	Other programs’ projects
`TOPAS_PHASE_RESTATED_IN_P1`	A magnetic phase was written in P1	Other programs’ projects
`TOPAS_PHASE_TERM_READ`	A parameter was read as a phase term	Other programs’ projects
`TOPAS_SPECIES_NORMALISED`	A TOPAS atom label was respelled	Other programs’ projects
`TOPAS_SPECIES_WRITTEN_NEUTRAL`	A TOPAS ion was written as neutral	Other programs’ projects
`WAVELENGTH_CALIBRATION`	A refined wavelength moved from its declared value	Refinement
`XRDML_ATTENUATOR_APPLIED`	A beam attenuator factor was applied	Reading files